• Ergonomic design in a small size - the maximum diameter less than 28mm. The head holding section is just 16mm so dentists can have better visibility and convenience in operation.
• “Multi-position type head" allows direction of contra angle to be changed easily.
• The LCD panel enhances user friendliness.
• Operates continuously for more than 2 hours (Dependent upon rated load)
• Memory for up to 5 programs. The RESET button can be used once the error occurs.
• The auto reverse function is activated depending on the comparison between load and set torque. A wide variety of functions such as “AUTO REVERSE", “AUTO STOP”, “AUTO REVERSE OFF", “REVERSE” and “AUTO RECIPROCATING” are available.
• The motor can be turned on and off by pressing the ON/OFF key. Alternatively, the unit can be operated by holding down the ON/OFF key during operation and letting go of the ON/OFF key to stop the handpiece.
• The motor softly starts. Since the rotation briefly stops before changing direction, there are no vibrations and shocks during the change of directions.
• The motor will switch to sleep mode when idol for 10 minutes. Click the "power" key to wake the unit.
• The rotating speed and torque can be compensated perfectly by the controlling chip.
• Charging interface is designed as MICRO USB.
• Battery is fully charged in 90 minutes.
• The contra angle provided for this product can be autoclaved at 135°C (excluding the motor).

Brochure

Instructions for Use

More downloads